Automated Battery Testing - C&S Buyers Guide

RECO’s Automated 30 Day Battery Testing System provides the ability to test your batteries without disconnecting AC power.

AUTOMATED BATTERY TESTING SYSTEM

FEATURES

The system is equipped with 2 dry relay contacts for voltage, temperature or current alarm.

Normally open contact remains closed when parameters are within set limits
Independent of the battery charger system
User programmable
Retrofit into other battery charger systems with the use of the Event Recorder display unit.

DATA COLLECTED

SMC CHARGER

FEATURES

Redundant Charging Modules
Battery Testing
Switch Mode Technology
- Low ripple currents of Switch Mode increases battery life
- 90% Efficiency at Full Capacity
Built-in Redundancy (40A and larger)
Remote Voltage Sense
- Compensates for voltage losses in the charging circuit
Battery Temperature Sensor
Quick Change Modules
- No need to remove charger to replace modules. Cut power, replace, and go
Adjustable Capacity
- 20A can be increased to 40A by adding a module
- 60A can be increased to 80A by adding module
- No need to replace the entire charger when updating locations
Remote Monitoring
- Optional Front Display Capable
  - No need for a computer when adjusting settings
  - Easy to use menu navigation
- Ethernet Port for Remote Monitoring
  - Access all parameters remotely through IP technology
  - Capable of using existing communications infrastructure such as SNMP
- microSD Memory Slot
  - Allows for future program updates and data download
- Monitor Multiple Parameters
  - Voltage input/DC output, current, battery temperature
  - Adaptable to other parameters

LOAD BANK

FEATURES

1800 watts, 100 amps tester
Discharger Batteries to test voltage and to make sure the battery current stays high

CELL MONITOR

FEATURES

OPTIONAL EQUIPMENT

DISPLAY

GROUND FAULT

Automated Battery Testing System